Finned Tube Heat Exchanger Exporters
Finned Tube Heat Exchangers are merely pressure vessels. It forces ambient air over the tubes’ exteriors to cool a circulating fluid inside finned tubes. Additionally, this is recognized as a device for transferring heat from a fluid to outside air. In India, we are the top producers of finned heat exchangers. Heat Transfer Equipment can offer a heating system as one unit, or additional ordinarily together with associate air preheater joined package.
The steam coil Heat exchanger/air preheater, conjointly better-known SCAP using, Aluminium Extruded fins and base tube. Preheats the combustion air before getting into the air preheater (APH) to extend the minimum metal temperature so as to lift the typical cold finish temperature and to forestall acid saturation point corrosion.
MAIN ADVANTAGE OF FINNED TUBE HEAT EXCHANGER
Finned tube heat exchanger does not require water. Therefore plants with significant cooling capabilities do not need to be located near a source of cooling water.
PURPOSE OF FINNED TUBE HEAT EXCHANGER
- They are typically employed when a process system produces heat, needs to be evacuated but that has no immediate purpose. Using ambient air is one of the easiest methods.
- They are often employed when the outlet temperature exceeds the maximum anticipated ambient air temperature by more than around 20 degrees Fahrenheit. Although they can be employed with lower approach temperatures. They are frequently more expensive when compared to exchangers that are both water-cooled and cooled by a cooling tower.
- Most importantly, because they do not require an additional water supply. They are a “green” alternative to cooling towers and shell and tube heat exchangers (water lost due to drift and evaporation, plus no water treatment chemicals are required).
To get finned tube heat exchangers at Coolfab Equipments!
